41K34EHC19256
41K34EHC19256
Standard
100mm x 41mm Paper Cone Fullrange

41K34EHC19256

Features
100mm x 41mm, Steel Frame
0.7" PESVW Voice Coil, POLYMIDE Former
Paper Cone, Rubber Surround
Ring Neodymium Magnet Motor System
VC Former and Basket Vent, Low Distortion (<3%)
Size
2.5 Inch
Fs
165 Hz
Re
6.3 Ohms
Sensitivity
82 dB
Quality Factor
1.54 Qts
Rated Power
10 W
  • Description
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This is a 100mm x 41mm 8 ohm driver, it is a Fullrange features 0.7 inch voice coil with PESVW. In term of suspension system, cone is consisted by Paper Cone body with NBR surround and spider is consisted by Conex. In term of magnet motor system, magnet is consisted by Neodymium material. It can be used on Soundbar model.

Family
Range
 
T-S Parameters
Resonance frequency [fs] 165.5 Hz
Mechanical Q factor [Qms] 6.55
Electrical Q factor [Qes] 2.014
Total Q factor [Qts]  1.54
Force factor [Bl] 3.143 Tm
Mechanical resistance [Rms] 0.477 kg/s
Moving mass [Mms]  3.001 g
Compliance [Cms] 0.308 mm/N
Effective diaph. diameter [D]  84.5 x 30 mm
Effective piston area [Sd] 23.42 cm²
Equivalent volume [Vas] 0.212 l
Sensitivity (2.83V/1m)  82 dB
Ratio Bl/√Re 1.25 N/√W
Ratio fs/Qts 107.5 Hz
Electrical Data
Nominal impedance [Zn]  8 Ω
Minimum impedance [Zmin]  6.8 Ω
Maximum impedance [Zo] 22.7 Ω
DC resistance [Re] 6.3 Ω
Voice coil inductance [Le]  0.089 mH
Power Handling
100h RMS noise test (IEC 18.4) 10 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 18.4 mm
Voice coil height 8.1 mm
Voice coil layers 2
Height of gap 4 mm
Linear excursion ± 2.05 mm
Max mech. excursion ± - mm
Unit weight 0.115 kg

 

41K34EHC19256

聯絡我們

想了解更多產品資訊,請隨時與我們聯繫。

*表示必填欄位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.