Standard
100mm x 41mm Paper Cone Fullrange
41K34EHC19256
Features
100mm x 41mm, Steel Frame
0.7” PESVW Voice Coil, Kapton Former
Paper Cone, Rubber Surround
Ring Neodymium Magnet Motor System
Parameters
Size
2.5 Inch
Fs
165 Hz
Re
6.3 Ohms
Sensitivity
82 dB
Quality Factor
1.54 Qts
Rated Power
10 W
This is a 100mm x 41mm 8 ohm driver, it is a Fullrange features 0.7 inch voice coil with PESVW. In term of suspension system, cone is consisted by Paper Cone body with NBR surround and spider is consisted by Conex. In term of magnet motor system, magnet is consisted by Neodymium material. It can be used on Soundbar model.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 165.5 Hz |
| Mechanical Q factor [Qms] | 6.55 |
| Electrical Q factor [Qes] | 2.014 |
| Total Q factor [Qts] | 1.54 |
| Force factor [Bl] | 3.143 Tm |
| Mechanical resistance [Rms] | 0.477 kg/s |
| Moving mass [Mms] | 3.001 g |
| Compliance [Cms] | 0.308 mm/N |
| Effective diaph. diameter [D] | 84.5 x 30 mm |
| Effective piston area [Sd] | 23.42 cm² |
| Equivalent volume [Vas] | 0.212 l |
| Sensitivity (2.83V/1m) | 82 dB |
| Ratio Bl/√Re | 1.25 N/√W |
| Ratio fs/Qts | 107.5 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 8 Ω |
| Minimum impedance [Zmin] | 6.8 Ω |
| Maximum impedance [Zo] | 22.7 Ω |
| DC resistance [Re] | 6.3 Ω |
| Voice coil inductance [Le] | 0.089 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 10 W |
| Long-term max power (IEC 18.2) | - W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 18.4 mm |
| Voice coil height | 8.1 mm |
| Voice coil layers | 2 |
| Height of gap | 4 mm |
| Linear excursion | ± 2.05 mm |
| Max mech. excursion | ± - mm |
| Unit weight | 0.115 kg |
