FSIFD3617-1400
FSIFD3617-1400
Standard
100mm x 42mm Paper Cone Fullrange

FSIFD3617-1400

Features
100mm x 42mm, Steel Frame
0.6" EISVW Voice Coil, Kapton Former
Paper Cone, Cloth Surround
Dual Ferrite Magnet Motor System
Low Distortion (<3%)
Power Handling with High pass filter -24dB/OCT @ 200 Hz
Size
2.5 Inch
Fs
210 Hz
Re
4 Ohms
Sensitivity
84 dB
Quality Factor
1.31 Qts
Rated Power
36 W
  • Description
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This is a 100mm x 42mm 4 ohm driver, it is a Fullrange features 0.6 inch voice coil with EISVW. In term of suspension system, cone is consisted by Paper Cone body with Cloth surround and spider is consisted by Conex. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on Soundbar model.

Family
Range

T-S Parameters
Resonance frequency [fs] 212.4 Hz
Mechanical Q factor [Qms] 3.815
Electrical Q factor [Qes] 2.01
Total Q factor [Qts]  1.316
Force factor [Bl] 2.203 Tm
Mechanical resistance [Rms] 0.752 kg/s
Moving mass [Mms]  2.148 g
Compliance [Cms] 0.261 mm/N
Effective diaph. diameter [D]  83.2 x 32 mm
Effective piston area [Sd] 24.43 cm²
Equivalent volume [Vas] 0.934 l
Sensitivity (2.83V/1m)  84 dB
Ratio Bl/√Re 1.197 N/√W
Ratio fs/Qts 161.39 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  3.33 Ω
Maximum impedance [Zo] 8.28 Ω
DC resistance [Re] 3.4 Ω
Voice coil inductance [Le]  0.046 mH
Power Handling
100h RMS noise test (IEC 18.4) 36 W
Long-term max power (IEC 18.2) 60 W
Voice Coil & Magnet Data
Voice coil diameter 14.28 mm
Voice coil height 6.6 mm
Voice coil layers 2
Height of gap 3 mm
Linear excursion ± 1.8 mm
Max mech. excursion ± - mm
Unit weight 0.244 kg

 

FSIFD3617-1400

Contact Us

Looking for more information?

Please feel free to contact us directly with any product inquiries.

*Fields that are required.

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.