Standard
100mm x 42mm Paper Cone Fullrange
FSIFD3617-1400
Features
100mm x 42mm, Steel Frame
0.6" EISVW Voice Coil, Kapton Former
Paper Cone, Cloth Surround
Dual Ferrite Magnet Motor System
Low Distortion (<3%)
Power Handling with High pass filter -24dB/OCT @ 200 Hz
Parameters
Size
2.5 Inch
Fs
210 Hz
Re
3.4 Ohms
Sensitivity
84 dB
Quality Factor
1.31 Qts
Rated Power
36 W
This is a 100mm x 42mm 4 ohm driver, it is a Fullrange features 0.6 inch voice coil with EISVW. In term of suspension system, cone is consisted by Paper Cone body with Cloth surround and spider is consisted by Conex. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on Soundbar model.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 212.4 Hz |
| Mechanical Q factor [Qms] | 3.815 |
| Electrical Q factor [Qes] | 2.01 |
| Total Q factor [Qts] | 1.316 |
| Force factor [Bl] | 2.203 Tm |
| Mechanical resistance [Rms] | 0.752 kg/s |
| Moving mass [Mms] | 2.148 g |
| Compliance [Cms] | 0.261 mm/N |
| Effective diaph. diameter [D] | 83.2 x 32 mm |
| Effective piston area [Sd] | 24.43 cm² |
| Equivalent volume [Vas] | 0.934 l |
| Sensitivity (2.83V/1m) | 84 dB |
| Ratio Bl/√Re | 1.197 N/√W |
| Ratio fs/Qts | 161.39 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 4 Ω |
| Minimum impedance [Zmin] | 3.33 Ω |
| Maximum impedance [Zo] | 8.28 Ω |
| DC resistance [Re] | 3.4 Ω |
| Voice coil inductance [Le] | 0.046 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 36 W |
| Long-term max power (IEC 18.2) | 60 W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 14.28 mm |
| Voice coil height | 6.6 mm |
| Voice coil layers | 2 |
| Height of gap | 3 mm |
| Linear excursion | ± 1.8 mm |
| Max mech. excursion | ± - mm |
| Unit weight | 0.244 kg |
