ASDFL1000-0400
ASDFL1000-0400
ASDFL1000-0400
family logo
2" Paper Cone Fullrange

ASDFL1000-0400

Features
2", Steel Frame
0.8", CCAW Voice Coil, Kapton Former
Paper Diaphragm, Rubber Surround
Neodymium Magnet Motor System
Waterproofing grade IPX7
Size
2 Inch
Fs
135 Hz
Re
3.6 Ohms
Sensitivity
80 dB
Quality Factor
0.48 Qts
Rated Power
10 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This 2 inch compact driver is designed for portable bluetooth driver, with 0.8 inch voice coil CCAW wire, Kapton former, paper cone and rubber surround. The Kapton former and basket under spider are vented holes so as to reduce air compression effects and aid cooling of the motor under high excursion conditions.It contains a dual Neodymium magnet motor system which provides maximum flux in a compact package, the waterproofing grade is IPX7, and low THD.

Family
Range
ASDFL1000-0400
 
T-S Parameters
Resonance frequency [fs] 137 Hz
Mechanical Q factor [Qms] 8.72
Electrical Q factor [Qes] 0.51
Total Q factor [Qts]  0.48
Force factor [Bl] 3.58 Tm
Mechanical resistance [Rms] 0.21 kg/s
Moving mass [Mms]  2.0 g
Compliance [Cms] 0.65 mm/N
Effective diaph. diameter [D]  37.8 mm
Effective piston area [Sd] 11.22 cm²
Equivalent volume [Vas] 0.11 l
Sensitivity (2.83V/1m)  80 dB
Ratio Bl/√Re 1.89 N/√W
Ratio fs/Qts 285.4 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  3.8 Ω
Maximum impedance [Zo] 36.3 Ω
DC resistance [Re] 3.6 Ω
Voice coil inductance [Le]  0.24 mH
Power Handling
100h RMS noise test (IEC 18.4) 10 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 19.4 mm
Voice coil height 6.4 mm
Voice coil layers 2
Height of gap 3 mm
Linear excursion ± 1.7 mm
Max mech. excursion ± 4.0 mm
Unit weight 0.071 kg

 

ASDFL1000-0400

聯絡我們

想了解更多產品資訊,請隨時與我們聯繫。

*表示必填欄位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.