Standard
					
								1” Titanium Compression Tweeter
      
				04FA0EHC25015
Features
								1” Exit
              1.7” CCAW Voice Coil, Kapton Former
              Titanium Diaphragm
              Ferrite Magnet Motor System
              Power Handling with 4th HP Filter @ 2000 Hz
          Parameters
										Size
													1 Inch
												Fs
													1000 Hz
												Re
													6 Ohms
												Sensitivity
													105 dB
												Rated Power
													50 W
												This model is a HF unit suitable for three way light systems. It will deliver an unmatched combination of extended linear frequency response and very high efficiency. With a throat exit of 0.8 inch. The Titanium dome diaphragm assembly, with its 1.7 inch Edgewound CCAW voice coil, is capable to handle up to 40W. Computer Aided Finite Element Analysis and extensive testing were used to obtain phase plug shape made in high pressure injectionmolded ABS, designed to assuring maximum strength. Final result is a smooth coherent wavefront in the horn entrance, high thermal stability and manufacturing consistency. The Ferrite magnet assembly is designed to obtain 13KGauss in the gap. The SPL measured at 2.83V/1m using typical horn.
Family
              
          Range
              
          | T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 1000 Hz | 
| Mechanical Q factor [Qms] | |
| Electrical Q factor [Qes] | |
| Total Q factor [Qts] | |
| Force factor [Bl] | Tm | 
| Mechanical resistance [Rms] | kg/s | 
| Moving mass [Mms] | g | 
| Compliance [Cms] | mm/N | 
| Effective diaph. diameter [D] | 49.1 mm | 
| Effective piston area [Sd] | 18.9 cm² | 
| Equivalent volume [Vas] | l | 
| Sensitivity (2.83V/1m) | 105 dB | 
| Ratio Bl/√Re | N/√W | 
| Ratio fs/Qts | Hz | 
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 6 Ω | 
| Minimum impedance [Zmin] | 6.2 Ω | 
| Maximum impedance [Zo] | 11.5 Ω | 
| DC resistance [Re] | 6 Ω | 
| Voice coil inductance [Le] | - mH | 
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 50 W | 
| Long-term max power (IEC 18.2) | 100 W | 
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 44.4 mm | 
| Voice coil height | 2.5 mm | 
| Voice coil layers | 1 | 
| Height of gap | 3.5 mm | 
| Linear excursion | ± 0.5 mm | 
| Max mech. excursion | ± -mm | 
| Unit weight | 1.34 kg |