AUGFL3084-JN01
AUGFL3084-JN01
AUGFL3084-JN01
family logo
1.25'' Aluminum cone Fullrange

AUGFL3084-JN01

Features
1.25", Steel Frame
1” PESVCCAW Voice Coil , Aluminum Former
Aluminum Cone , Rubber Surround
Neodymium Magnet Motor System
Ferrofluid-Cooled
Size
1.25 Inch
Fs
573 Hz
Re
3 Ohms
Sensitivity
87 dB
Quality Factor
0.82 Qts
Rated Power
10 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

The ultimate 1.25 inch, 4 ohm Plastic frame driver have been newly designed with 1 inch PESVCCAW voice coil, Upgraded Aluminum cone and Neodymium ferro fluid magnet motor system to provide wide range sound experience. This spectacular driver is the new benchmark for soundbar systems.

Family
Range
AUGFL3084-JN01
 
T-S Parameters
Resonance frequency [fs] 573 Hz
Mechanical Q factor [Qms] 2.95
Electrical Q factor [Qes] 1.13
Total Q factor [Qts]  0.82
Force factor [Bl] 3.11 Tm
Mechanical resistance [Rms] 1.06 kg/s
Moving mass [Mms]  0.87 g
Compliance [Cms] 0.088 mm/N
Effective diaph. diameter [D]  33.3 mm
Effective piston area [Sd] 8.71 cm²
Equivalent volume [Vas] 0.0095 l
Sensitivity (2.83V/1m)  87 dB
Ratio Bl/√Re 1.73 N/√W
Ratio fs/Qts 698.7 Hz
Electrical Data
Nominal impedance [Zn]  3.2 Ω
Minimum impedance [Zmin]  3.6 Ω
Maximum impedance [Zo] 12.7 Ω
DC resistance [Re] 3.2 Ω
Voice coil inductance [Le]  0.032 mH
Power Handling
100h RMS noise test (IEC 18.4) 10 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 25.5 mm
Voice coil height 3.2 mm
Voice coil layers 2
Height of gap 2 mm
Linear excursion ± 0.6 mm
Max mech. excursion ± - mm
Unit weight 0.0826 kg
AUGFL3084-JN01

聯絡我們

想了解更多產品資訊,請隨時與我們聯繫。

*表示必填欄位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.