118mm x 57mm Paper Cone Fullrange
AUGFL2079-JN01
Features
118mm x 57mm, Steel Frame
0.6” PECCAW Voice Coil, Kapton Former
Paper Cone, Rubber Surround
Rectangle Ferrite Magnet Motor System
Low Distortion (<3%)
Parameters
Size
3.5 Inch
Fs
125 Hz
Re
3.6 Ohms
Sensitivity
82 dB
Quality Factor
1.85 Qts
Rated Power
15 W
The ultimate 118mmx57mm, 4 ohm Steel frame driver have been newly designed with 0.6 inch PESVCCAW voice coil, Upgraded Paper cone and Ferrite magnet motor system to provide wide range sound experience. This spectacular driver is the new benchmark for soundbar systems.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 127.8 Hz |
| Mechanical Q factor [Qms] | 8.35 |
| Electrical Q factor [Qes] | 2.38 |
| Total Q factor [Qts] | 1.85 |
| Force factor [Bl] | 2.2 Tm |
| Mechanical resistance [Rms] | 0.38 kg/s |
| Moving mass [Mms] | 3.96 g |
| Compliance [Cms] | 0.39 mm/N |
| Effective diaph. diameter [D] | 67.26 mm |
| Effective piston area [Sd] | 34.53 cm² |
| Equivalent volume [Vas] | 0.662 l |
| Sensitivity (2.83V/1m) | 82 dB |
| Ratio Bl/√Re | 1.16 N/√W |
| Ratio fs/Qts | 69.08 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 4 Ω |
| Minimum impedance [Zmin] | 4.1 Ω |
| Maximum impedance [Zo] | 13.9 Ω |
| DC resistance [Re] | 3.6 Ω |
| Voice coil inductance [Le] | 0.045 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 15 W |
| Long-term max power (IEC 18.2) | - W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 16.28 mm |
| Voice coil height | 10 mm |
| Voice coil layers | 2 |
| Height of gap | 3 mm |
| Linear excursion | ± 3.5 mm |
| Max mech. excursion |
± - mm |
| Unit weight | 0.277 kg |
