ASDFL1001-0401
ASDFL1001-0401
Standard
100mm x 52mm Paper Cone Fullrange

ASDFL1001-0401

Features
100mm x 52mm, Steel Frame
0.7" PESVW Voice Coil, Kapton Former
Paper Cone, Rubber Surround
Ferrite Magnet Motor System
Low Distortion (<3%)
Power Handling with High pass filter -12dB/OCT 180Hz
Size
2.75 Inch
Fs
185 Hz
Re
3.3 Ohms
Sensitivity
83 dB
Quality Factor
1.56 Qts
Rated Power
20 W
  • Description
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

The ultimate 100mm x 52mm, 4 ohm Steel frame driver have been newly designed with 1 inch PESVW voice coil, Upgraded Paper cone and Ferrite magnet motor system to provide wide range sound experience. This spectacular driver is the new benchmark for soundbar systems.

Family
Range
 
T-S Parameters
Resonance frequency [fs] 186.3 Hz
Mechanical Q factor [Qms] 5.26
Electrical Q factor [Qes] 2.22
Total Q factor [Qts]  1.56
Force factor [Bl] 2.2 Tm
Mechanical resistance [Rms] 0.61 kg/s
Moving mass [Mms]  2.74 g
Compliance [Cms] 0.26 mm/N
Effective diaph. diameter [D]  88x41.9 mm
Effective piston area [Sd] 33.1 cm²
Equivalent volume [Vas] 0.4119 l
Sensitivity (2.83V/1m)  83 dB
Ratio Bl/√Re 1.21 N/√W
Ratio fs/Qts 119.4 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  3.9 Ω
Maximum impedance [Zo] 8.8 Ω
DC resistance [Re] 3.3 Ω
Voice coil inductance [Le]  0.99 mH
Power Handling
100h RMS noise test (IEC 18.4) 20W
Long-term max power (IEC 18.2) 40 W
Voice Coil & Magnet Data
Voice coil diameter 18.4 mm
Voice coil height 6.5 mm
Voice coil layers 2
Height of gap 3 mm
Linear excursion ± 1.75 mm
Max mech. excursion ± 4mm
Unit weight 0.2635 kg
image

聯絡我們

想了解更多產品資訊,請隨時與我們聯繫。

*表示必填欄位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.