AUGWL0187-JN01
AUGWL0187-JN01
AUGWL0187-JN01
family logo
4" Glass Fiber Cone Woofer

AUGWL0187-JN01

Features
4”, Aluminum Die-cast Frame
1" EISVW Voice Coil, Aluminum Former
Glass Fiber Cone, Rubber Surround
Neodymium Magnet Motor System
Spider-Less, Slim Design
Size
4 Inch
Fs
70 Hz
Re
1.82 Ohms
Sensitivity
83 dB
Quality Factor
0.53 Qts
Rated Power
5 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This newly designed slim woofer with only 29.5mm height to liberate maximum 5W RMS power. Woofer consisted with a special designed dual voice coil simply match with various of amplifier to achieve flexible impendence requirement, unique designed aluminum frame and Neodymium motor system. It can contribute balanced powerful bass with low distortion. Series size starts from 4”to 6.5” it suitable with Premium audio system applications.

Family
Range
Characteristics
AUGWL0187-JN01
 
T-S Parameters
Resonance frequency [fs] 70 Hz
Mechanical Q factor [Qms] 5.89
Electrical Q factor [Qes] 0.58
Total Q factor [Qts]  0.53
Force factor [Bl] 4.47Tm
Mechanical resistance [Rms] 1.09 kg/s
Moving mass [Mms]  14.53 g
Compliance [Cms] 0.35 mm/N
Effective diaph. diameter [D]  83 mm
Effective piston area [Sd] 54.11 cm²
Equivalent volume [Vas] 1.46 l
Sensitivity (2.83V/1m)  88 dB
Ratio Bl/√Re 3.31 N/√W
Ratio fs/Qts 132.07 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  2.32 Ω
Maximum impedance [Zo] 20.15 Ω
DC resistance [Re] 1.82 Ω
Voice coil inductance [Le]  0.42 mH
Power Handling
100h RMS noise test (IEC 18.4) 5 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 25.5 mm
Voice coil height 9 mm
Voice coil layers 4+4
Height of gap 4 mm
Linear excursion  ± 2.5 mm
Max mech. excursion ± 4.1 mm
Unit weight 0.16 kg
AUGWL0187-JN01

聯絡我們

想了解更多產品資訊,請隨時與我們聯繫。

*表示必填欄位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.