FSIFD0520-2600
FSIFD0520-2600
Standard
2" Paper Cone Fullrange

FSIFD0520-2600

Feature
2", Steel Frame
0.6" CCAW Voice Coil, Kapton Former
Paper Cone, Rubber Surround
Wide Frequency Range
Dual Ferrite Magnet Motor System
Mylar Cap
Size
2 Inch
Fs
150 Hz
Re
6 Ohms
Sensitivity
80 dB
Quality Factor
1.28 Qts
Rated Power
5 W
  • Description
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This is a 2 inch 4 ohm driver, it is a Fullrange features 0.6 inch voice coil with CCAW. In term of suspension system, cone is consisted by Paper Cone body with NBR surround and spider is consisted by Conex. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on Soundbar and AI speaker model.

Family
Range

T-S Parameters
Resonance frequency [fs] 152.4 Hz
Mechanical Q factor [Qms] 11.824
Electrical Q factor [Qes] 1.441
Total Q factor [Qts]  1.284
Force factor [Bl] 2.08 Tm
Mechanical resistance [Rms] 0.100 kg/s
Moving mass [Mms]  1.23 g
Compliance [Cms] 0.887 mm/N
Effective diaph. diameter [D]  42 mm
Effective piston area [Sd] 13.85cm²
Equivalent volume [Vas] 0.2409 l
Sensitivity (2.83V/1m)  80 dB
Ratio Bl/√Re 0.904 N/√W
Ratio fs/Qts 118.69 Hz
Electrical Data
Nominal impedance [Zn]  6 Ω
Minimum impedance [Zmin]  5.4 Ω
Maximum impedance [Zo] 20.9 Ω
DC resistance [Re] 5.2 Ω
Voice coil inductance [Le]  0.12 mH
Power Handling
100h RMS noise test (IEC 18.4) 5 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 16.4 mm
Voice coil height 5.2 mm
Voice coil layers 2
Height of gap 3 mm
Linear excursion ± 1.1 mm
Max mech. excursion ± - mm
Unit weight 0.16 kg

 

FSIFD0520-2600

Contact Us

Looking for more information?

Please feel free to contact us directly with any product inquiries.

*Fields that are required.