Standard
					
								3” Paper Cone Fullrange
      
				FSB522030-3806
Features
								3”, Steel Frame
              1” CCAW Voice Coil, Aluminum Former
              Paper Cone, Rubber Surround
              Ferrite Magnet Motor System
              Wide Frequency Range
              Extended Copper Cap , Low Distortion(<3%)
          Parameters
										Size
													3 Inch
												Fs
													115 Hz
												Re
													7.31 Ohms
												Sensitivity
													80 dB
												Quality Factor
													1.1 Qts
												Rated Power
													20 W
												This is a 3 inch 8 ohm driver, it is a Fullrange features 1 inch voice coil with CCAW. In term of suspension system, cone is consisted by Paper Cone body with NBR surround and spider is consisted by Conex. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on Soundbar model.
Family
              
          Range
              
          | T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 115 Hz | 
| Mechanical Q factor [Qms] | 5.109 | 
| Electrical Q factor [Qes] | 1.406 | 
| Total Q factor [Qts] | 1.102 | 
| Force factor [Bl] | 3.528 Tm | 
| Mechanical resistance [Rms] | 0.469 kg/s | 
| Moving mass [Mms] | 3.292 g | 
| Compliance [Cms] | 0.574 mm/N | 
| Effective diaph. diameter [D] | 60 mm | 
| Effective piston area [Sd] | 28.27 cm² | 
| Equivalent volume [Vas] | 0.6495 l | 
| Sensitivity (2.83V/1m) | 80 dB | 
| Ratio Bl/√Re | 1.31 N/√W | 
| Ratio fs/Qts | 104.36 Hz | 
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 8 Ω | 
| Minimum impedance [Zmin] | 8.1 Ω | 
| Maximum impedance [Zo] | 29 Ω | 
| DC resistance [Re] | 7.31 Ω | 
| Voice coil inductance [Le] | 0.082 mH | 
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 20 W | 
| Long-term max power (IEC 18.2) | - W | 
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 25.4 mm | 
| Voice coil height | 9.7 mm | 
| Voice coil layers | 2 | 
| Height of gap | 4 mm | 
| Linear excursion | ± 2.85 mm | 
| Max mech. excursion | ± - mm | 
| Unit weight | 0.345 kg |