FSB012030-0A00
FSB012030-0A00
Standard
3" Paper Cone Woofer

FSB012030-0A00

Features
3", Steel Frame
0.8" PESVW Voice Coil, Aluminum Former
Paper Cone, Rubber Surround
Ferrite Magnet Motor System
PU Center Cap
Size
3 Inch
Fs
120 Hz
Re
9.24 Ohms
Sensitivity
82 dB
Quality Factor
0.52 Qts
Rated Power
15 W
  • Description
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This is a 3 inch 10 ohm driver, it is a woofer features 0.8 inch voice coil with PESVW. In term of suspension system, cone is consisted by Paper Cone body with NBR surround and spider is consisted by NC. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on home theater system.

Family
Range
 
T-S Parameters
Resonance frequency [fs] 121.8 Hz
Mechanical Q factor [Qms] 4.026
Electrical Q factor [Qes] 0.595
Total Q factor [Qts]  0.518
Force factor [Bl] 7.478 Tm
Mechanical resistance [Rms] 0.894 kg/s
Moving mass [Mms]  4.701 g
Compliance [Cms] 0.363 mm/N
Effective diaph. diameter [D]  60 mm
Effective piston area [Sd] 28.27 cm²
Equivalent volume [Vas] 0.4108 l
Sensitivity (2.83V/1m)  82 dB
Ratio Bl/√Re 2.46 N/√W
Ratio fs/Qts 235 Hz
Electrical Data
Nominal impedance [Zn]  10 Ω
Minimum impedance [Zmin]  9.25 Ω
Maximum impedance [Zo] 50.51 Ω
DC resistance [Re] 9.24 Ω
Voice coil inductance [Le]  0.704 mH
Power Handling
100h RMS noise test (IEC 18.4) 15 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 20.32 mm
Voice coil height 7.8 mm
Voice coil layers 4
Height of gap 3 mm
Linear excursion ± 2.4 mm
Max mech. excursion ± -mm
Unit weight 0.41 kg

 

FSB012030-0A00

Contact Us

Looking for more information?

Please feel free to contact us directly with any product inquiries.

*Fields that are required.

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.