Standard
0.6” Textile Dome Tweeter
FSA040510-0600
Features
0.8”, Plastic Frame
0.6” CCAW Voice Coil, Kapton Former
Textile Dome Diaphragm
Dual Neodymium Magnet Motor System
Power Handling with 2nd HP Filter @ 8000 Hz
Parameters
Size
0.6 Inch
Fs
2490 Hz
Re
5.16 Ohms
Sensitivity
85 dB
Quality Factor
1.24 Qts
Rated Power
5 W
This is a 0.6 inch 6 ohm driver, it is a tweeter features 0.6 inch voice coil with CCAW. In term of suspension system, dome is consisted by textile material. In term of magnet motor system, magnet is consisted by Neodymium material. It can be used on Soundbar model.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 2490 Hz |
| Mechanical Q factor [Qms] | 1.642 |
| Electrical Q factor [Qes] | 5.061 |
| Total Q factor [Qts] | 1.24 |
| Force factor [Bl] | 0.95 Tm |
| Mechanical resistance [Rms] | 0.539 kg/s |
| Moving mass [Mms] | 0.057 g |
| Compliance [Cms] | 0.072 mm/N |
| Effective diaph. diameter [D] | 18.5 mm |
| Effective piston area [Sd] | 2.84 cm² |
| Equivalent volume [Vas] | 0.0008 l |
| Sensitivity (2.83V/1m) | 85 dB |
| Ratio Bl/√Re | 0.418 N/√W |
| Ratio fs/Qts | 2008.1 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 6 Ω |
| Minimum impedance [Zmin] | 5.4 Ω |
| Maximum impedance [Zo] | 10.6 Ω |
| DC resistance [Re] | 5.16 Ω |
| Voice coil inductance [Le] | 0.024 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 5 W |
| Long-term max power (IEC 18.2) | 10 W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 16.3 mm |
| Voice coil height | 1.0 mm |
| Voice coil layers | 2 |
| Height of gap | 1.5 mm |
| Linear excursion | ± 0.25 mm |
| Max mech. excursion | ± - mm |
| Unit weight | 0.021 kg |
