Standard
					
								3” Ultra-Thin Paper Cone Fullrange
      
				FSA010530-0401
Features
								3”, Steel Frame
              0.8” CCAW Voice Coil, Kapton Former
              Paper Cone, Rubber  Surround
              Dual Neodymium Magnet Motor System
              Slim Driver
              Conference Speaker System
          Parameters
										Size
													3 Inch
												Fs
													195 Hz
												Re
													3.64 Ohms
												Sensitivity
													84 dB
												Quality Factor
													1.45 Qts
												Rated Power
													5 W
												This is a 3 inch 4 ohm driver, it is a Fullrange features 0.8 inch voice coil with CCAW. In term of suspension system, cone is consisted by Paper Cone body with NBR surround and spider is consisted by NC. In term of magnet motor system, magnet is consisted by Neodymium material. It can be used on conference speaker system model.
Family
              
          Range
              
          Characteristics
          
      | T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 196.8 Hz | 
| Mechanical Q factor [Qms] | 5.848 | 
| Electrical Q factor [Qes] | 1.931 | 
| Total Q factor [Qts] | 1.452 | 
| Force factor [Bl] | 2.609 Tm | 
| Mechanical resistance [Rms] | 0.617 kg/s | 
| Moving mass [Mms] | 2.917 g | 
| Compliance [Cms] | 0.224 mm/N | 
| Effective diaph. diameter [D] | 59 mm | 
| Effective piston area [Sd] | 27.34 cm² | 
| Equivalent volume [Vas] | 0.237 l | 
| Sensitivity (2.83V/1m) | 84 dB | 
| Ratio Bl/√Re | 1.37 N/√W | 
| Ratio fs/Qts | 135.5 Hz | 
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 4 Ω | 
| Minimum impedance [Zmin] | 3.9 Ω | 
| Maximum impedance [Zo] | 9.7 Ω | 
| DC resistance [Re] | 3.64 Ω | 
| Voice coil inductance [Le] | 0.05 mH | 
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 5 W | 
| Long-term max power (IEC 18.2) | 6 W | 
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 20.32 mm | 
| Voice coil height | 5.0 mm | 
| Voice coil layers | 2 | 
| Height of gap | 2.5 mm | 
| Linear excursion | ± 1.25 mm | 
| Max mech. excursion | ± - mm | 
| Unit weight | 0.075 kg |