Standard
10" Paper Cone Subwoofer

ASDSD4016-0301

Features
10", Steel Frame
1.5" PESVW Voice Coil, Aluminum Former
Paper Cone, Rubber Surround
Ferrite Magnet Motor System
Low Distortion (<3%)
Size
10 Inch
Fs
35 Hz
Re
2.5 Ohms
Sensitivity
89 dB
Quality Factor
0.59 Qts
Rated Power
100 W
  • Description
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

The ultimate 10 inch 3 ohm Subwoofer features 1.5 inc PESVW voice coil, Rubber surround with customized Paper cone, and Ferrite magnet motor system. It is the greatest usages for subwoofer models.

Family
Range
 
T-S Parameters
Resonance frequency [fs] 34.6 Hz
Mechanical Q factor [Qms] 7.44
Electrical Q factor [Qes] 0.64
Total Q factor [Qts]  0.59
Force factor [Bl] 7.24 Tm
Mechanical resistance [Rms] 1.79 kg/s
Moving mass [Mms]  61.05 g
Compliance [Cms] 0.35 mm/N
Effective diaph. diameter [D]  210 mm
Effective piston area [Sd] 346.4 cm²
Equivalent volume [Vas] 58.72 l
Sensitivity (2.83V/1m)  89 dB
Ratio Bl/√Re 2.9 N/√W
Ratio fs/Qts 58.64 Hz
Electrical Data
Nominal impedance [Zn]  3 Ω
Minimum impedance [Zmin]  3.4 Ω
Maximum impedance [Zo] 25.9 Ω
DC resistance [Re] 2.5 Ω
Voice coil inductance [Le]  1.18 mH
Power Handling
100h RMS noise test (IEC 18.4) 100 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 35.5 mm
Voice coil height 14.8 mm
Voice coil layers 4
Height of gap 6 mm
Linear excursion ± 4.4 mm
Max mech. excursion ±  mm
Unit weight 2 kg
ASDSD4016-0301

Contact Us

Looking for more information?

Please feel free to contact us directly with any product inquiries.

*Fields that are required.

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.