Standard
0.6” Textile Dome Tweeter
ASDDT5017-0601
Features
0.6”, Plastic Frame
0.6” CCAW Voice Coil, Aluminum Former
Textile Dome Diaphragm
Neodymium Magnet Motor System
Power Handling with 2nd HP Filter @6000Hz
Parameters
Size
0.6 Inch
Fs
1685 Hz
Re
5.4 Ohms
Sensitivity
84 dB
Quality Factor
2.47 Qts
Rated Power
15 W
This is a 0.6 inch 6 ohm driver, it is a tweeter features 0.6 inch voice coil with CCAW. In term of suspension system, dome is consisted by textile material. In term of magnet motor system, magnet is consisted by Neodymium material. It can be used on Soundbar model.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 1683 Hz |
| Mechanical Q factor [Qms] | 6.421 |
| Electrical Q factor [Qes] | 4.008 |
| Total Q factor [Qts] | 2.467 |
| Force factor [Bl] | 1.474 Tm |
| Mechanical resistance [Rms] | 0.245 kg/s |
| Moving mass [Mms] | 0.149 g |
| Compliance [Cms] | 0.06 mm/N |
| Effective diaph. diameter [D] | 19 mm |
| Effective piston area [Sd] | 2.84 cm² |
| Equivalent volume [Vas] | 0.0007 l |
| Sensitivity (2.83V/1m) | 84 dB |
| Ratio Bl/√Re | 0.273 N/√W |
| Ratio fs/Qts | 682.21 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 6 Ω |
| Minimum impedance [Zmin] | 5.39 Ω |
| Maximum impedance [Zo] | 12.92 Ω |
| DC resistance [Re] | 5.4 Ω |
| Voice coil inductance [Le] | 0.035 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 15 W |
| Long-term max power (IEC 18.2) | 30 W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 16.28 mm |
| Voice coil height | 2.0 mm |
| Voice coil layers | 2 |
| Height of gap | 2 mm |
| Linear excursion | ± 0 mm |
| Max mech. excursion | ± -mm |
| Unit weight | 0.0234 kg |
