Standard
6.5” Paper Cone Subwoofer
16LC0EHC22005
Features
6.5”, Steel Frame
1.5” EISVCCAW Voice Coil, GFB Former
Paper Cone, Rubber Surround
Ferrite Magnet Motor System
Low Distortion (<3%)
Parameters
Size
6.5 Inch
Fs
50 Hz
Re
3.5 Ohms
Sensitivity
86 dB
Quality Factor
0.76 Qts
Rated Power
80 W
The ultimate 6.5 inch 4 ohm Subwoofer features 1.5 inch EISVCCAW voice coil, Rubber surround with customized Paper cone, and Ferrite magnet motor system. It is the greatest usages for subwoofer models.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 50 Hz |
| Mechanical Q factor [Qms] | 12.81 |
| Electrical Q factor [Qes] | 0.81 |
| Total Q factor [Qts] | 0.76 |
| Force factor [Bl] | 6.69 Tm |
| Mechanical resistance [Rms] | 0.81 kg/s |
| Moving mass [Mms] | 33.20 g |
| Compliance [Cms] | 0.30 mm/N |
| Effective diaph. diameter [D] | 123.7 mm |
| Effective piston area [Sd] | 120.18 cm² |
| Equivalent volume [Vas] | 6.23 l |
| Sensitivity (2.83V/1m) | 86 dB |
| Ratio Bl/√Re | 3.57 N/√W |
| Ratio fs/Qts | 65.19 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 4 Ω |
| Minimum impedance [Zmin] | 3.1 Ω |
| Maximum impedance [Zo] | 30.5 Ω |
| DC resistance [Re] | 3.5 Ω |
| Voice coil inductance [Le] | 0.43 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 80 W |
| Long-term max power (IEC 18.2) | W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 38.55 mm |
| Voice coil height | 30.5 mm |
| Voice coil layers | 2 |
| Height of gap | 8 mm |
| Linear excursion | ± 11.25 mm |
| Max mech. excursion | ± -mm |
| Unit weight | 2.95 kg |
