AUGWL0010-JN10
AUGWL0010-JN10
AUGWL0010-JN10
family logo
4" Carbon Pulp Woofer

AUGWL0010-JN10

Features
4”, Aluminum Die-cast Frame
1” CCAW Voice Coil, Aluminum Former
Pulp and Carbon Fiber Cone, Rubber Surround
Ferrite Magnet Motor System
Conex Spider
Size
4 Inch
Fs
60 Hz
Re
4 Ohms
Sensitivity
88 dB
Quality Factor
0.4 Qts
Rated Power
35 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This 4 inch Woofer, features 1 inch voice coil, pulp with carbon fiber cone, and ferrite magnet motor system. As for the selection of material, this series of driver uses a new mixed material with pulp and 60% carbon fiber, it can greatly enhance the stiffness of the cone body and control range of the internal damping.

Family
Range
Characteristics
AUGWL0010-JN10

T-S Parameters
Resonance frequency [fs] 62.5 Hz
Mechanical Q factor [Qms] 3.12
Electrical Q factor [Qes] 0.459
Total Q factor [Qts]  0.4
Force factor [Bl] 4.306 Tm
Mechanical resistance [Rms] 0.833 kg/s
Moving mass [Mms]  6.616 g
Compliance [Cms] 0.979 mm/N
Effective diaph. diameter [D]  83 mm
Effective piston area [Sd] 54.11 cm²
Equivalent volume [Vas] 4.0568 l
Sensitivity (2.83V/1m)  88 dB
Ratio Bl/√Re 2.38 N/√W
Ratio fs/Qts 156.25 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  3.73 Ω
Maximum impedance [Zo] 19.27 Ω
DC resistance [Re] 3.27 Ω
Voice coil inductance [Le]  0.085 mH
Power Handling
100h RMS noise test (IEC 18.4) 35W
Long-term max power (IEC 18.2) 50 W
Voice Coil & Magnet Data
Voice coil diameter 25.5 mm
Voice coil height 12.5 mm
Voice coil layers 2
Height of gap 6 mm
Linear excursion ± 3.25 mm
Max mech. excursion ± - mm
Unit weight 0.95 kg

 

AUGWL0010-JN10

Contact Us

Looking for more information?

Please feel free to contact us directly with any product inquiries.

*Fields that are required.