AUGWL0010-JN01
AUGWL0010-JN01
AUGWL0010-JN01
family logo
4" Paper Cone Woofer

AUGWL0010-JN01

Features
4", Aluminum Die-cast Frame
1" CCAW Voice Coil, Glass Fiber Former
Coated Paper Cone, Rubber Surround, Long Excursion(±5.2mm)
Ferrite Magnet Motor System
Wide Frequency Range
With Aluminum Shorting Ring, Low Distortion(<3%)
Size
4 Inch
Fs
80 Hz
Re
8 Ohms
Sensitivity
84 dB
Quality Factor
0.79 Qts
Rated Power
30 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This 4 inch 8 ohm Woofer driver features a powerful ferrite magnet  motor system, with Aluminum shorting ring to lower coil inductance and distortion. The long-throw voice coil ensures linear high excursion. The die cast frame offers structural rigidity, heat sinking capacity for motor, and additional air venting under spider so as to reduce air compression effects.

Family
Range
AUGWL0010-JN01

T-S Parameters
Resonance frequency [fs] 80 Hz
Mechanical Q factor [Qms] 7.797
Electrical Q factor [Qes] 0.885
Total Q factor [Qts]  0.795
Force factor [Bl] 5.27 Tm
Mechanical resistance [Rms] 0.411 kg/s
Moving mass [Mms]  6.326 g
Compliance [Cms] 0.617 mm/N
Effective diaph. diameter [D]  83.5 mm
Effective piston area [Sd] 54.76 cm²
Equivalent volume [Vas] 2.619 l
Sensitivity (2.83V/1m)  82 dB
Ratio Bl/√Re 1.9 N/√W
Ratio fs/Qts 100.6 Hz
Electrical Data
Nominal impedance [Zn]  8 Ω
Minimum impedance [Zmin]  8.43 Ω
Maximum impedance [Zo] 56.22 Ω
DC resistance [Re] 7.6 Ω
Voice coil inductance [Le]  0.349 mH
Power Handling
100h RMS noise test (IEC 18.4) 30 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 25.4 mm
Voice coil height 15.4 mm
Voice coil layers 2
Height of gap 5 mm
Linear excursion ± 5.2 mm
Max mech. excursion ± 13 mm
Unit weight 0.762 kg

 

AUGWL0010-JN01

Contact Us

Looking for more information?

Please feel free to contact us directly with any product inquiries.

*Fields that are required.

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.