AUGFL3012-JN01
AUGFL3012-JN01
AUGFL3012-JN01
family logo
3" Paper cone Fullrange

AUGFL3012-JN01

Features
2x4”, Steel Frame
0.72” PESVW Voice Coil , Aluminum Former
Paper Cone , Rubber Surround
Ferrite Magnet Motor System
Copper-shorting Ring
Low Distortion(<3%)
Size
3 Inch
Fs
202 Hz
Re
3 Ohms
Sensitivity
81 dB
Quality Factor
1.46 Qts
Rated Power
15 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

The ultimate 2x4 inch, 4 ohm Steel frame driver have been newly designed with 0.72 inch PESVW voice coil, Upgraded Paper cone and Ferrite magnet motor system to provide wide range sound experience. This spectacular driver is the new benchmark for soundbar systems.

Family
Range
AUGFL3012-JN01
 
T-S Parameters
Resonance frequency [fs] 202 Hz
Mechanical Q factor [Qms] 4.241
Electrical Q factor [Qes] 2.223
Total Q factor [Qts]  1.458
Force factor [Bl] 2.8 Tm
Mechanical resistance [Rms] 1.232 kg/s
Moving mass [Mms]  4.1 g
Compliance [Cms] 0.151 mm/N
Effective diaph. diameter [D]  64.92 mm
Effective piston area [Sd] 33.1 cm²
Equivalent volume [Vas] 0.2334 l
Sensitivity (2.83V/1m)  81 dB
Ratio Bl/√Re 1.503 N/√W
Ratio fs/Qts 138.5 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  4.58 Ω
Maximum impedance [Zo] 10.17 Ω
DC resistance [Re] 3.47 Ω
Voice coil inductance [Le]  0.031 mH
Power Handling
100h RMS noise test (IEC 18.4) 15 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 18.4 mm
Voice coil height 6.4 mm
Voice coil layers 2
Height of gap 3 mm
Linear excursion ± 1.7 mm
Max mech. excursion ± - mm
Unit weight 0.27 kg
AUGFL3012-JN01

Contact Us

Looking for more information?

Please feel free to contact us directly with any product inquiries.

*Fields that are required.

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.