AUGFL2022-JN01
AUGFL2022-JN01
AUGFL2022-JN01
family logo
2.5” Aluminum cone Fullrange

AUGFL2022-JN01

Features
2.5”, Plastic Frame
1.0” PECCAW Voice Coil , Aluminum Former
Aluminum Cone , Rubber Surround
Neodymium Magnet Motor System
Copper-shorting Ring
Slim Driver
Size
2.5 Inch
Fs
139 Hz
Re
4 Ohms
Sensitivity
82 dB
Quality Factor
0.79 Qts
Rated Power
8 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

The ultimate 2.5 inch, 4 ohm Plastic frame driver have been newly designed with 1.0 inch PECCAW voice coil, Upgraded Aluminum cone and Neodymium magnet motor system to provide wide range sound experience. This spectacular driver is the new benchmark for soundbar systems.

Family
Range
AUGFL2022-JN01
 
T-S Parameters
Resonance frequency [fs] 139 Hz
Mechanical Q factor [Qms] 4.807
Electrical Q factor [Qes] 0.941
Total Q factor [Qts]  0.787
Force factor [Bl] 3.98 Tm
Mechanical resistance [Rms] 0.799 kg/s
Moving mass [Mms]  4.381 g
Compliance [Cms] 0.297 mm/N
Effective diaph. diameter [D]  63 mm
Effective piston area [Sd] 31.17 cm²
Equivalent volume [Vas] 0.408 l
Sensitivity (2.83V/1m)  82 dB
Ratio Bl/√Re 2.017 N/√W
Ratio fs/Qts 176.6 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  4.48 Ω
Maximum impedance [Zo] 22 Ω
DC resistance [Re] 3.89 Ω
Voice coil inductance [Le]  0.027 mH
Power Handling
100h RMS noise test (IEC 18.4) 8 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 25.4 mm
Voice coil height 6.3 mm
Voice coil layers 2
Height of gap 3 mm
Linear excursion ± 1.65 mm
Max mech. excursion ± - mm
Unit weight 0.112 kg
AUGFL2022-JN01

Contact Us

Looking for more information?

Please feel free to contact us directly with any product inquiries.

*Fields that are required.

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.