Standard
6.5” Paper Cone Subwoofer
ASDWD6111-0401
Features
6.5”, Steel Frame
1.2” EISVW Voice Coil, Aluminum Former
Paper Cone, Rubber Surround
Strong Ferrite Magnet Motor System
Aluminum-shorting Ring
Parameters
Size
6.5 Inch
Fs
65 Hz
Re
3.3 Ohms
Sensitivity
86 dB
Quality Factor
0.65 Qts
Rated Power
80 W
This ultimate 6.5 inch subwoofer unit have been newly designed with customized Steel frame, 1.2 inch EISVW voice coil, Upgraded Paper pulp cone and Ferrite magnet motor system to provide great deep bass sound quality with low distortion. This driver is the new benchmark for strong subwoofer taste audiences.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 64.5 Hz |
| Mechanical Q factor [Qms] | 7.21 |
| Electrical Q factor [Qes] | 0.71 |
| Total Q factor [Qts] | 0.65 |
| Force factor [Bl] | 9.34 Tm |
| Mechanical resistance [Rms] | 2.61 kg/s |
| Moving mass [Mms] | 46.37 g |
| Compliance [Cms] | 0.13 mm/N |
| Effective diaph. diameter [D] | 130 mm |
| Effective piston area [Sd] | 132.7 cm² |
| Equivalent volume [Vas] | 3.28 l |
| Sensitivity (2.83V/1m) | 86 dB |
| Ratio Bl/√Re | 5.2 N/√W |
| Ratio fs/Qts | 99.2 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 4 Ω |
| Minimum impedance [Zmin] | 4.5 Ω |
| Maximum impedance [Zo] | 29.3 Ω |
| DC resistance [Re] | 3.3 Ω |
| Voice coil inductance [Le] | 0.59 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 80 W |
| Long-term max power (IEC 18.2) | - W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 30.5 mm |
| Voice coil height | 17.9 mm |
| Voice coil layers | 4 |
| Height of gap | 6 mm |
| Linear excursion | ± 6 mm |
| Max mech. excursion | ± - mm |
| Unit weight | 1.68 kg |
