Standard
85mm x 40mm Paper Cone Midrange
ASDMD6005-0601
Features
85mm x 40mm, Steel Frame
0.6” EISVW Voice Coil, Aluminum Former
Paper Cone, Rubber Surround
Powerful Neodymium Ring Motor System
Bottom Plate Vent, Low Distortion(<3%)
Parameters
Size
2.5 Inch
Fs
190 Hz
Re
5.6 Ohms
Sensitivity
81 dB
Quality Factor
1.25 Qts
Rated Power
8 W
The ultimate 3.25x1.5 inch, 6 ohm driver have been newly designed with 0.6 inch EISVW voice coil and Conex spider, upgraded Paper cone and Neodymium magnet motor system to provide great sound quality. This marvelous driver is the new benchmark for soundbar systems.
Family
Range
| T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 189.8 Hz |
| Mechanical Q factor [Qms] | 4.72 |
| Electrical Q factor [Qes] | 1.71 |
| Total Q factor [Qts] | 1.25 |
| Force factor [Bl] | 3.24 Tm |
| Mechanical resistance [Rms] | 0.69 kg/s |
| Moving mass [Mms] | 2.75 g |
| Compliance [Cms] | 0.26 mm/N |
| Effective diaph. diameter [D] | 76 x 33 mm |
| Effective piston area [Sd] | 19.45 cm² |
| Equivalent volume [Vas] | 0.1369 l |
| Sensitivity (2.83V/1m) | 81 dB |
| Ratio Bl/√Re | 1.37 N/√W |
| Ratio fs/Qts | 151.84 Hz |
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 6 Ω |
| Minimum impedance [Zmin] | 6.2 Ω |
| Maximum impedance [Zo] | 18.6 Ω |
| DC resistance [Re] | 5.6 Ω |
| Voice coil inductance [Le] | 0.19 mH |
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 8 W |
| Long-term max power (IEC 18.2) | - W |
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 16.28 mm |
| Voice coil height | 7.9 mm |
| Voice coil layers | 2 |
| Height of gap | 4 mm |
| Linear excursion | ± 1.95 mm |
| Max mech. excursion | ± - mm |
| Unit weight | 0.108 kg |
