ASDFD0001-0800
ASDFD0001-0800
Standard
100mm x 42mm Paper Cone Fullrange

ASDFD0001-0800

Features
100mm x 42mm, Steel Frame
0.7" PESVW Voice Coil, Kapton Former
Paper Cone, Cloth Surround
Ferrite Magnet Motor System
Low Distortion (<3%)
Power Handling with High pass filter -10dB/OCT 230Hz
Size
2.5 Inch
Fs
205 Hz
Re
7.36 Ohms
Sensitivity
84 dB
Quality Factor
1.77 Qts
Rated Power
75 W
  • Description
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

The ultimate 4*1.65 inch, 8 ohm Steel frame driver have been newly designed with 0.7 inch PESVW voice coil, Upgraded Paper cone and Ferrite magnet motor system to provide wide range sound experience. This spectacular driver is the new benchmark for soundbar systems.

Family
Range
 
T-S Parameters
Resonance frequency [fs] 207.3 Hz
Mechanical Q factor [Qms] 4.81
Electrical Q factor [Qes] 2.814
Total Q factor [Qts]  1.775
Force factor [Bl] 2.767 Tm
Mechanical resistance [Rms] 0.609 kg/s
Moving mass [Mms]  2.249 g
Compliance [Cms] 0.262 mm/N
Effective diaph. diameter [D]  83.6 x 32 mm
Effective piston area [Sd] 24.76 cm²
Equivalent volume [Vas] 0.2144 l
Sensitivity (2.83V/1m)  84 dB
Ratio Bl/√Re 1.02 N/√W
Ratio fs/Qts 116.7 Hz
Electrical Data
Nominal impedance [Zn]  8 Ω
Minimum impedance [Zmin]  6.95 Ω
Maximum impedance [Zo] 16.3 Ω
DC resistance [Re] 7.36 Ω
Voice coil inductance [Le]  0.082 mH
Power Handling
100h RMS noise test (IEC 18.4) 75 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 16.4 mm
Voice coil height 6.8 mm
Voice coil layers 2
Height of gap 3 mm
Linear excursion ± 1.9 mm
Max mech. excursion ± - mm
Unit weight 0.22 kg
ASDFD0001-0800

联络我们

想了解更多产品资讯,请随时与我们联系。

*表示必填栏位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.