ASDFD0001-0402
ASDFD0001-0402
Standard
1.75" Paper Cone Fullrange

ASDFD0001-0402

Features
1.75”, Plastic Frame
0.8” CCAW Voice Coil, Kapton Former
Paper Cone, Rubber Surround
Dual Neodymium Magnet Motor System
Power Handling with 4th HP Filter @250Hz
Size
1.75 Inch
Fs
215 Hz
Re
3.47 Ohms
Sensitivity
83 dB
Quality Factor
0.46 Qts
Rated Power
5 W
  • Description
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This ultimate 1.75 inch, 4 ohm Steel frame driver have been newly designed with 0.8 inch PECCAW voice coil, Upgraded Paper cone and Neodymium magnet motor system to provide wide range sound experience. This spectacular driver is the new benchmark for soundbar systems.

Family
Range
Characteristics
 
T-S Parameters
Resonance frequency [fs] 213.4 Hz
Mechanical Q factor [Qms] 9.153
Electrical Q factor [Qes] 0.491
Total Q factor [Qts]  0.466
Force factor [Bl] 3.25 Tm
Mechanical resistance [Rms] 0.163 kg/s
Moving mass [Mms]  1.116 g
Compliance [Cms] 0.499 mm/N
Effective diaph. diameter [D]  31.8 mm
Effective piston area [Sd] 7.94 cm²
Equivalent volume [Vas] 0.0445 l
Sensitivity (2.83V/1m)  83 dB
Ratio Bl/√Re 1.745 N/√W
Ratio fs/Qts 457.94 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  3.6 Ω
Maximum impedance [Zo] 43.2 Ω
DC resistance [Re] 3.47 Ω
Voice coil inductance [Le]  0.071 mH
Power Handling
100h RMS noise test (IEC 18.4) 5 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 19.4 mm
Voice coil height 6.1 mm
Voice coil layers 2
Height of gap 2.5 mm
Linear excursion ± 1.8 mm
Max mech. excursion ± - mm
Unit weight 0.057 kg
ASDFD0001-0402

联络我们

想了解更多产品资讯,请随时与我们联系。

*表示必填栏位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.