AUGFL0005-JN08
AUGFL0005-JN08
AUGFL0005-JN08
family logo
2" Aluminum Cone Fullrange

AUGFL0005-JN08

Feature
2", Aluminum Die-cast Frame
1" CCAW Voice Coil, Aluminum Former
Aluminum Cone, Rubber Surround
Neodymium Magnet Motor System
Low Distortion(<1.5%)
Effective Frequency Band 140Hz-40KHz
Size
2 Inch
Fs
140 Hz
Re
4 Ohms
Sensitivity
85 dB
Quality Factor
0.48 Qts
Rated Power
10 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This Fullrange series consisted with  4 types 1.5/2/2.5/3 inch drivers. With this unique 2 inch driver, it features 1 inch CCAW voice coil, Aluminum diaphragm with rubber surround, Neodymium magnet motor system to extend the high frequency response up to 40KHz with low distortion. This finest unit is designed for Premium speaker applications.

Family
Range
Characteristics
AUGFL0005-JN08

T-S Parameters
Resonance frequency [fs] 140 Hz
Mechanical Q factor [Qms] 1.981
Electrical Q factor [Qes] 0.635
Total Q factor [Qts]  0.481
Force factor [Bl] 2.847 Tm
Mechanical resistance [Rms] 0.809 kg/s
Moving mass [Mms]  1.775 g
Compliance [Cms] 0.69 mm/N
Effective diaph. diameter [D]  44 mm
Effective piston area [Sd] 15.21 cm²
Equivalent volume [Vas] 226 l
Sensitivity (2.83V/1m)  85 dB
Ratio Bl/√Re 1.589 N/√W
Ratio fs/Qts 298.9 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  3.53 Ω
Maximum impedance [Zo] 13.672 Ω
DC resistance [Re] 3.21 Ω
Voice coil inductance [Le]  0.019 mH
Power Handling
100h RMS noise test (IEC 18.4) 10 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 25.4 mm
Voice coil height 6.0 mm
Voice coil layers 2
Height of gap 3.5 mm
Linear excursion ± 1.25 mm
Max mech. excursion ± - mm
Unit weight 0.15 kg
AUGFL0005-JN08

联络我们

想了解更多产品资讯,请随时与我们联系。

*表示必填栏位