85K53EHC16111
85K53EHC16111
Standard
85mm x 40mm Paper Cone Woofer

85K53EHC16111

Features
85mm x 40mm, Steel Frame
0.6" PESVW Voice Coil, Kapton Former
Paper Cone, Rubber Surround
Strong Ferrite Magnet Motor System
For TV or Soundbar Product
Size
2.25 Inch
Fs
200 Hz
Re
7.29 Ohms
Sensitivity
80 dB
Quality Factor
2.08 Qts
Rated Power
5 W
  • Description
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This is a 85mm x 40mm 8 ohm driver, it is a Woofer features 0.6 inch voice coil with PESVW. In term of suspension system, cone is consisted by Paper Cone body with NBR surround and spider is consisted by Conex. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on Soundbar model.

Family
Range
 
T-S Parameters
Resonance frequency [fs] 198.6 Hz
Mechanical Q factor [Qms] 6.6
Electrical Q factor [Qes] 3.054
Total Q factor [Qts]  2.088
Force factor [Bl] 2.348 Tm
Mechanical resistance [Rms] 0.35 kg/s
Moving mass [Mms]  0.851 g
Compliance [Cms] 0.347 mm/N
Effective diaph. diameter [D]  73.7 x 30 mm
Effective piston area [Sd] 17.4 cm²
Equivalent volume [Vas] 0.1504 l
Sensitivity (2.83V/1m)  80 dB
Ratio Bl/√Re 0.8696 N/√W
Ratio fs/Qts 95.11 Hz
Electrical Data
Nominal impedance [Zn]  8 Ω
Minimum impedance [Zmin]  7.5 Ω
Maximum impedance [Zo] 16.815 Ω
DC resistance [Re] 7.29 Ω
Voice coil inductance [Le]  0.085 mH
Power Handling
100h RMS noise test (IEC 18.4) 5 W
Long-term max power (IEC 18.2) - W
Voice Coil & Magnet Data
Voice coil diameter 16.28 mm
Voice coil height 4.4 mm
Voice coil layers 2+2
Height of gap 3 mm
Linear excursion ± 0.7 mm
Max mech. excursion ± - mm
Unit weight 0.1725 kg

 

85K53EHC16111

联络我们

想了解更多产品资讯,请随时与我们联系。

*表示必填栏位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.