ASDWDA065-0400
ASDWDA065-0400
Standard
6.5" Paper Cone Subwoofer

ASDWDA065-0400

Features
6.5“, Steel Frame
1.2" PESVW Voice Coil, Aluminum Former
Paper Cone, Rubber Surround
Dual Ferrite Magnet Motor System
High Sensitivity
Power Handling with Low pass filter -12dB/OCT 180Hz
Size
6.5 Inch
Fs
50 Hz
Re
3.4 Ohms
Sensitivity
88 dB
Quality Factor
0.66 Qts
Rated Power
100 W
  • Description
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This is a 6.5 inch 4 ohm driver, it is a Subwoofer features 1.2 inch voice coil with PESVW. In term of suspension system, cone is consisted by Paper Cone body with NBR surround and spider is consisted by NC. In term of magnet motor system, magnet is consisted by Ferrite material. It can be used on Subwoofer model.

Family
Range
 
T-S Parameters
Resonance frequency [fs] 50 Hz
Mechanical Q factor [Qms] 5.23
Electrical Q factor [Qes] 0.76
Total Q factor [Qts]  0.66
Force factor [Bl] 7.27 Tm
Mechanical resistance [Rms] 2.23 kg/s
Moving mass [Mms]  36.12 g
Compliance [Cms] 0.26 mm/N
Effective diaph. diameter [D]  135 mm
Effective piston area [Sd] 132.7 cm²
Equivalent volume [Vas] 6.58 l
Sensitivity (2.83V/1m)  88 dB
Ratio Bl/√Re 3.95 N/√W
Ratio fs/Qts 75.7 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  3.7 Ω
Maximum impedance [Zo] 23 Ω
DC resistance [Re] 3.4 Ω
Voice coil inductance [Le]  1.07 mH
Power Handling
100h RMS noise test (IEC 18.4) 100 W
Long-term max power (IEC 18.2) 150 W
Voice Coil & Magnet Data
Voice coil diameter 30.5 mm
Voice coil height 13.5 mm
Voice coil layers 4
Height of gap 6 mm
Linear excursion ± 3.75 mm
Max mech. excursion ± 15mm
Unit weight 1.3 kg

 

ASDWDA065-0400

联络我们

想了解更多产品资讯,请随时与我们联系。

*表示必填栏位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.