Standard
					
								2.5” Paper Cone Fullrange
      
				65A20EHC19267
Features
								2.5”, Steel Frame
              0.8” CCAW Voice Coil, Kapton Former
              Paper Cone, Rubber Surround
              Dual Neodymium Magnet Motor System
              Power Handling with 2nd HP Filter @ 140Hz
          Parameters
										Size
													2.5 Inch
												Fs
													185 Hz
												Re
													7.1 Ohms
												Sensitivity
													83 dB
												Quality Factor
													1.04 Qts
												Rated Power
													20 W
												This is a 2.5 inch 8 ohm driver, it is a Fullrange features 0.8 inch voice coil with CCAW. In term of suspension system, cone is consisted by Paper Cone body with NBR surround and spider is consisted by Conex. In term of magnet motor system, magnet is consisted by Neodymium material. It can be used on Soundbar model.
Family
              
          Range
              
          | T-S Parameters | |
|---|---|
| Resonance frequency [fs] | 186.8 Hz | 
| Mechanical Q factor [Qms] | 6.18 | 
| Electrical Q factor [Qes] | 1.25 | 
| Total Q factor [Qts] | 1.04 | 
| Force factor [Bl] | 3.42 Tm | 
| Mechanical resistance [Rms] | 0.34 kg/s | 
| Moving mass [Mms] | 1.78 g | 
| Compliance [Cms] | 0.406 mm/N | 
| Effective diaph. diameter [D] | 50.5 mm | 
| Effective piston area [Sd] | 20 cm² | 
| Equivalent volume [Vas] | 0.23 l | 
| Sensitivity (2.83V/1m) | 83 dB | 
| Ratio Bl/√Re | 1.4 N/√W | 
| Ratio fs/Qts | 209 Hz | 
| Electrical Data | |
|---|---|
| Nominal impedance [Zn] | 8 Ω | 
| Minimum impedance [Zmin] | 6.8 Ω | 
| Maximum impedance [Zo] | 33.5 Ω | 
| DC resistance [Re] | 7.1 Ω | 
| Voice coil inductance [Le] | 0.142 mH | 
| Power Handling | |
|---|---|
| 100h RMS noise test (IEC 18.4) | 20 W | 
| Long-term max power (IEC 18.2) | 25 W | 
| Voice Coil & Magnet Data | |
|---|---|
| Voice coil diameter | 20.32 mm | 
| Voice coil height | 4.6 mm | 
| Voice coil layers | 2 | 
| Height of gap | 4 mm | 
| Linear excursion | ± 0.3 mm | 
| Max mech. excursion | ± - mm | 
| Unit weight | 0.085 kg |