AUGWL0016-JN03
AUGWL0016-JN03
AUGWL0016-JN03
family logo
6.5" Carbon Cone Woofer

AUGWL0016-JN03

Features
6.5”, Aluminum Die-cast Frame
2” CCAW Voice Coil, Aluminum Former
Pulp and Carbon Fiber Cone, Rubber Surround
Ferrite Magnet Motor System
Conex Spider
Size
6.5 Inch
Fs
40 Hz
Re
3.39 Ohms
Sensitivity
89 dB
Quality Factor
0.31 Qts
Rated Power
80 W
  • Description
  • Simulation
  • Measure Chart
  • Specification
  • Mechanical Drawing
SPEC SHEET

This 6.5 inch Woofer, features 2 inch voice coil, pulp with carbon fiber cone, and ferrite magnet motor system. As for the selection of material, this series of driver uses a new mixed material with pulp and 60% carbon fiber, it can greatly enhance the stiffness of the cone body and control range of the internal damping.

Family
Range
Characteristics
AUGWL0016-JN03
 
T-S Parameters
Resonance frequency [fs] 40.2 Hz
Mechanical Q factor [Qms] 2.298
Electrical Q factor [Qes] 0.364
Total Q factor [Qts]  0.314
Force factor [Bl] 6.726 Tm
Mechanical resistance [Rms] 2.116 kg/s
Moving mass [Mms]  19.265 g
Compliance [Cms] 0.815 mm/N
Effective diaph. diameter [D]  134 mm
Effective piston area [Sd] 141.03 cm²
Equivalent volume [Vas] 22.93 l
Sensitivity (2.83V/1m)  89 dB
Ratio Bl/√Re 3.65 N/√W
Ratio fs/Qts 128 Hz
Electrical Data
Nominal impedance [Zn]  4 Ω
Minimum impedance [Zmin]  3.99 Ω
Maximum impedance [Zo] 20.4 Ω
DC resistance [Re] 3.39 Ω
Voice coil inductance [Le]  0.156 mH
Power Handling
100h RMS noise test (IEC 18.4) 80 W
Long-term max power (IEC 18.2) 100 W
Voice Coil & Magnet Data
Voice coil diameter 49.55 mm
Voice coil height 16 mm
Voice coil layers 2
Height of gap 6 mm
Linear excursion ± 5 mm
Max mech. excursion ± 12.5 mm
Unit weight 2.4 kg

 

AUGWL0016-JN03

联络我们

想了解更多产品资讯,请随时与我们联系。

*表示必填栏位

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.